4

STUFFING FOAM CUSHIONS
THE EASY WAY, THE WAY
FACTORIES DO (VACUUM).

FREE SLIP FILM WITH CUSHIONS


TANK TYPE VACUUM OR SHOP VACUUM

+ =
AND SLIP FILM GIVES A FINISHED CUSHION

1 - WRAP SLIP FILM AROUND FOAM LEAVING
SLIP FILM ABOUT 12" BIGGER THAN THE FOAM,
YOU DON'T HAVE TO GLUE OR TAPE THE FILM.
THE SLIP FILM WILL SEAL ITSELF WHEN YOU
START VACUUM.

2 - TAKE HOSE FROM VACUUM AND PUT
NEXT TO FOAM AND TURN ON VACUUM.
THE AIR WILL START DRAWING OUT
OF THE FOAM AND SEAL OFF THE FILM.

3 - ONCE THE AIR IS OUT OF THE FOAM AND
THE CUSHION IS SHRUNK DOWN. LEAVE THE
VACUUM ON AND SLIP FOAM INTO THE COVER.

4 - WHEN YOU HAVE FOAM IN THE COVER,
SHUT OFF VACUUM AND REMOVE HOSE.

5 - CUT BACK SLIP FILM SO FOAM CAN GET AIR
AND RETURN BACK TO ORIGINAL SHAPE.

6 - TO FINISH THE JOB JUST ZIP UP OR SEW UP
AND YOU ARE FINISHED.

YOU NEED TO REMOVE THE SLIP FILM FROM
THE BACK OF THE CUSHION SO THE FOAM CAN
BREATH. YOU CAN REMOVE ALL OF THE FILM BUT
IT WORKS VERY WELL AS A VAPOR BARRIER TO
PROTECT FROM SPILLS, YOU DON'T EVEN KNOW
IT'S THERE.

HOME Page